Mardec R.K.Latex Pvt Ltd(MRK) produces a wide range of innovative rubber based products which have earned a reputation for their consistent quality and timely delivery.

5.Estate Brown Crepe (EBC)

These grades are made from fresh cup lumps and other high grade rubber scrap generated on rubber estate.

ECB is mainly used for door mats, rubber beadings, door stoppers, rubber seals, automobile parts etc.

6.Skim Crepe

It is a crepe rubber that made from the rubber by product of latex centrifuging process and skim rubber which has 3-5% rubber. MRK Skim is similar to that of SMR 5 with higher content of nitrogen. It has high initial Mooney viscosity. It is fast curing and slightly more scorchy than conventional grades of natural rubber. This inherent behavior can be overcome by the use of delayed action accelerators.

This can be advantageously used in tyre re-treading compounds, ebonite products and microcellular products as well as in general rubber goods such as car mats, flaps, rubber tiles and shoe soles. This can also be blended with other Natural rubber grades in the right proportion to get the desired quality of end products thereby saving substantial cost of raw material.

7.Carpet Backing Compound

Super MAT grade is a Synthetic + Natural Latex Mix for binding and protective coating possessing weather resistant, water proofing and washable properties. This is an adhesive compound providing bond among various cotton, jute and such other fibers used in carpet manufacturing industries. It is a thick soft paste formulated with the blend of Natural Rubber, Polymers, Special Additives and Preservatives. Though the product is air drying, it can be heated at about 100 degree Centigrade as per the specific production requirements. When cured perfectly, compound layer so formed is tough, washable, abrasion/fungus resistant, water & Oil proof, and Non cracking.

Super MAT compound specifically applied at the back of carpets for the purpose of bonding and increasing dimensional stability. This is also used as the reinforcing layer strengthening the carpet and contributing to its weight for smooth laying.

8.Pre-Vulcanized Latex (PV Latex)

It is a form of latex ideal for small scale manufacturers of balloons and gloves where it does not require to compound the latex to produce superior products. This will bring down the cost of production of small scale units. It has long shelf storage life, online process life, consistency and stability.

We would like to share our competitive edge with you. Please send in your enquiries to